Time limit is exhausted. Please reload CAPTCHA. + seven = sixteen
Canty specializes in MOLTEN GLASS LEVEL using ethernet CCD cameras.
1) GLASS BROCHURE
Name
Email address
Phone
Inquiry
Vector Control Modules (VCM’s) serve as image processors for any of CANTY’s applications requiring analysis. These units are built as a turnkey solution to ensure the most convenient and simple startup for a camera system. VCM’s can power camera systems using power over Ethernet (POE) and come pre-loaded with application specific software to best serve your needs. With three different families of models, CANTY provides a variety of VCM’s to fit the needs of your installation. See our product brochure for additional information!
The CANTY Molten Glass Level system consists of a high temperature surveillance camera, mounted to view the surface of the molten glass through an opening in the wall. On the wall directly opposite the camera, a reference point is created, often by simply removing a brick from the wall, or boring a hole though it. The position of the reflection of this reference point on the surface of the glass relative to the fixed mount camera, is directly related to the molten glass level. CantyVision™ software is configured to track the position of this reflection with accuracy to 0.001” (0.025mm). A cross-hair is displayed on the operator screen image at all times, to allow the user to visually verify what point is begin tracked by the software. Control outputs are available to the DCS via OPC, 4-20mA and Modbus TCP/IP.
A camera light combination system is mounted to the centrifuge using the CANTY angled mounting plate. This allows for continuous monitoring from the control room, of initial product filling, the various washing and spinning cycles, and product discharge, therefore enabling greater operator control and efficient identification of any process issues. In the control room, the Vector™ image processing computer will analyze this view and provide a 4-20mA or OPC output of fill level, filtering level, and a separate cake (solids) detection signal. The level control allows for consistent batching to the centrifuge. The cake detection 4-20mA or OPC output signal provides for immediate detection of solids, which prevent the cake from cracking. This means higher product yield due to fewer washes, and ultimately better product quality.
Monitor phase split in batch mode on organic droplets for increased product recovery. As the droplets appear the system warns of organic phase and the upcoming emulsion. The amount of early droplets and their retraction time will indicate the completeness of the separation. Once the split is identified and stopped, the operator has a visual verification from the video monitor. The color can then be analyzed to ensure there is no inversion.
The CANTY Jet Spray Ring generates a high pressure vortex rinsing action to remove tough deposits from sight glasses, lights, and vision systems.
Features:
• No loss of glass over time • Scratches do not affect safety or life • Unlike competitors glass, no cracks